Javascript DHTML Drop Down Menu Powered by

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player



1. Lightweight hand held hydraulic pressure pump.
2. Pressure can be generated with fewer strokes by hand.
3. Generates pressure up to 400 Kg/cm2 / Bar with Water or 700 Kg/cm2 or Bar      with Oil.
4. Top ½ ” BSP (F) adopter for the Master gauge.
5. Side flexible tubing with ¼” BSP (F) adopter for gauges to be tested.
6. Side release knob for pressure.
7. Side zero adjuster knob.
8. Hydraulic Oil container
Accuracy : +/- 0.5%
* Extension cable
* Adopters ” BSP (M) X ” BSP (F) - 1 No.
* Adopters ” BSP (M) X 3/8” BSP (F) - 1 No.
* Adopters ” BSP (M) X ” BSP (F) - 1 No.
* Washers for ”, 3/8”, & ” Connection
* Hydraulic oil – liter
This is a hydraulic pump. Use any water or hydraulic oil as pressure medium. First ensure there is enough water or oil in the reservoir .There is a screw below the reservoir, remove it and fill water or oil using an water or oil can and tight the screw. At the front there is a ” BSP female connection. Put the master gauge in that connection .At the side of the pump there is a 1/4 “ BSP male connection with a cap. Fix one side of the cable there and other end to the gauge to be calibrated. Tighten the release valve. First prime the pump. To prime push the rod below the reservoir. Hold the rod pushing and start pumping. When priming is over release the push rod. In this position the gap between the two handles is less. At the time of priming the handle position will be wider. There is a black knob which is used for fine adjust of the gauge. To release the pressure open the release valve.
Temperature Instruments Dial Thermometers - Chemical / Laboratory Glass Thermometers - Industrial Marine / Glass Thermometers - Electronic Temperature Indicators & Controller - Portable Temperature Indicator / Thermohygrometers - Digital Thermometer cum Hygrometer - RTD'S & Thermocouples - Thermocouple Probes For Portable Temperature Indicator - Extruders - Compensating Cables - Temperature Recorders - Temperature Switches - Temperature Indicator Crayons
Pressure Instruments Pressure Gauges - Manometers - Dead Weight Testers / Comparison Testers - Pressure Switches - Pressure Recorders - Digital Pressure Indicators / Controllers
Flow & Level Instruments Rotameter / Flow Meter - Level Gauges - Level Switches
Temp & Pressure Instruments Accessories Thermowell - Pulsation Snubber - Needle Valve (Isolation Valve) -  Manifolds Valve -  Quick Fitting Adapters & Reducers - Ferrule Fittings - Syphon - Gauge Cock -  Pulsation Dampener - Over Pressure protector (gauge saver)
Test & Calibration

Calibration Certificate Traceable to National Standard - Temperature Calibration bath -  Hand Held Pressure Cum Vaccum Pump - Hand Held Hydraulic Pressure Pump - Hand Held Low Pressure & Vacuum Pump - Hand held vaccum / pressure pump without digital pressure gauge -Digital Pressure Gauge - Digital Pressure Gauge Low Range-  Dead Weight Vacuum Tester - Comparison Pressure Test Pump, Comparison Vaccum Test Pump - Dead Weight Pressure Tester

Home - About Us - Products - Clients - Enquiry - Contact  Designed & Hosted by : MID   Promoted by : GID