| TECHNICAL DATA |
TECHNICAL SPECIFICATION |
| SENSING ELEMENT |
: Phosphor Bronze Bellows |
| PROCESS CONNECTION |
: 1/4"BSP (F) |
| ENCLOSURE |
: Painted Mild Steel |
| ENCLOSURE PROTECTION |
: IP: 32 |
| SWITCH TYPE |
: 1 SPDT contact system |
| SWITCH RATING |
: 6A Inductive/10A Resistive 380 VAC, O.2A Inductive/ 1OA resistive 250V DC |
| CABLE ENTRY |
: PG 13.5 |
| MOUNTING |
: Surfacel Panel |
|
| |
| TYPE |
CODE NO. |
RANGE (PSIG) |
DIFFERENTIAL (PSI) |
MAX. PRESSURE (PSIG) |
| IPS-70 |
020D8275 |
0-70 |
4-55 |
230 |
| IPS-100 |
020D8276 |
0-100 |
7-85 |
230 |
| IPS-200 |
020D8277 |
85-215 |
20-70 |
450 |
| IPS-400 |
020D8278 |
82-425 |
45-115 |
450 |
|
| IPSD - 50 DIFFERENTIAL PRESSURE SWITCHES |
|
| TECHNICAL DATA |
TECHNICAL SPECIFICATION |
| RANGE |
: 4.3 - 64 Psig (0.3 - 4.5 atmg) |
| DIFFERENTIAL |
: 2.8 Psi (0.2 atm) Fixed |
| MAXIMUM PRESSURE |
: 313 Psig (22 atmg) |
| SENSING ELEMENT |
: Stainless Steel Bellow |
| PROCESS CONNECTION |
: 3/8 BSP (M) |
| ENCLOSURE |
: Painted Mild Steel |
| EXCLOSURE PROTECTION |
: IP : 32, dust proof |
| SWITCH TYPE |
: 1 SPDT microswitch |
| SWITCH RATING |
: 2A 250 VAC, 0.2A 250 VDC |
| CABLE ENTRY |
: PG 13.5 |
| MOUNTING |
: Surface / Panel |
| CODE NO. |
: 060D9002 |
|
| TYPE MP PRESSURE CONTROLS |
|
|
| OPERATING FUNCTION : |
Type MP is a single pole double throw (SPDT) pressure control for stopping and starting large and small refrigeration compressors,using R12, R22, R40 & R717 refrigerants. Construction is simple and sturdy, and the device is enclosed in a dust proof mild steel casing. All parts are rust proofed and designed for long life. Starting and stopping pressures can be set independently, and the device has a clearly read pressure range scale. |
| TYPE |
MODEL |
RESET |
REFRIGERANT |
PRESSURE RANGE |
DIFFERENTIAL |
MAX PRESSURE (amg) |
FUNCTION ON PRESSURE INCREASE |
CONNECTION SIZE |
| Low |
MP-1 |
Auto |
R-12,R-22,
R-40 |
30 cm Hg to 7 atmg |
- |
0.5 to 6 |
- |
16 |
Starts |
1/4 " flag |
| Pressure |
MP-1A |
Auto |
R717 (NH3) |
30 cm Hg to 7 atmg |
- |
0.5 to 6 |
- |
16 |
Starts |
Steel capillary tube |
| Control |
MP-5 |
Auto |
R12,R22,
R40 |
- |
6 to 30 |
- |
3 to 8 |
32 |
Stops |
1/4 " flag |
| |
MP-5A |
Auto |
R717(NH3) |
- |
6 to 22 |
- |
2 to 8 |
32 |
Stops |
Steel capillary tube |
| |
MP-5R |
Manual |
R12,R22,
R40 |
- |
6 to 30 |
- |
3 (Fixed) |
32 |
Stops |
1/4 " flag |
| |
MP-5AR |
Manual |
R717(NH3) |
- |
6 to 22 |
- |
2 (Fixed) |
32 |
Stops |
Steel capillary tube |
| |
MP-15 |
Auto |
R12,R22,
R40 |
30 cm Hg to 7 atmg |
8 to 30 |
0.5 to 6 |
4 (Fixed) |
16 for low pressure side |
Low Pressure Starts |
1/4 " flag |
| |
MP-15A |
Auto |
R717(NH3) |
30 cm Hg to 7 atmg |
8 to 22 |
0.5 to 6 |
3 (Fixed) |
16 for low pressure side |
Low Pressure Starts |
Steel capillary tube |
| |
MP-15R |
Manual |
R12,R22,
R40 |
30 cm Hg to 7 atmg |
8 to 30 |
o.6 (Fixed) |
4 (Fixed) |
32 for low pressure side |
High Pressure Starts |
1/4 " flag |
| |
MP-15AR |
Manual |
R717(NH3) |
30 cm Hg to 7 atmg |
8 to 22 |
0.6 (Fixed) |
3 (Fixed) |
32 for low pressure side |
High Pressure Starts |
Steel capillary tube |
|
| TYPE MP DIFFERENTIAL PRESSURE CONTROL |
| OPERATING FUNCTION : |
Type MP is a single pole double throw (SPDT) pressure control for stopping and starting large and small refrigeration compressors,using R12, R22, R40 & R717 refrigerants. Construction is simple and sturdy, and the device is enclosed in a dust proof mild steel casing. All parts are rust proofed and designed for long life. Starting and stopping pressures can be set independently, and the device has a clearly read pressure range scale. |
| TYPE |
MODEL |
RESET |
REFRIGERANT |
AP RANGE
(atm) |
DIFFERENTIAL
(atm) |
MAX
PRESSURE |
TIME
DELAY |
CONNECTION SIZE |
| Differential |
MP-55 |
Manual |
R-12, R-22,
R-40 |
|
|
|
|
1/4" Flare |
| Pressure |
MP-55 |
Manual |
R-12, R-22,
R-40 |
0.3-4.5 |
0.2 Fixed |
22 |
60 |
Steel |
| Control |
MP-55 |
Manual |
R 717 (NH3) |
|
|
|
Sec. |
tube Capiilary |
|
| B SERIES SWITCHES |
|
|
| INDFOS B Series Switches are built for reliability and long life. A rugged diaphragm sealed piston actuator provides set point repeatability of +1%. The enclosure is die-cast aluminium and is available in weather proof and explosion Proof versions (Table A) A wide variety of SPDT and Dual (2) SPDT snap action switches are avaliable to meet many electrical load requirements (Table B).Applications include: Pumps, Compressors, Heat Exchangers , Biolers, Marine Equipment, Hydraulic Systems , Lube Systems , etc. |
| A |
ENCLOSURE |
| B4 |
Pressure switch, weather proof |
| B7 |
Pressure switch, explosion proof |
| D4 |
Differential pressure switch, weather proof |
| D7 |
Differential pressure switch, explosion proof |
| T4 |
Temperature switch, weather proof. |
| T7 |
Temperature switch, explosion proof. |
|
| B |
SWITCH TYPE |
CODE |
| TYPE |
RATING |
1 SPDT |
2 SPDT |
| Narrow dead band |
15 A250 VAG |
20 |
61 |
| |
0.4 A 120 VDC |
|
|
| General purpose |
15A 250 VAG |
24 |
64 |
| |
0.25A 250 VDC |
|
|
| Heavy duty DC |
10A 125VDC |
25 |
66 |
| Environment proof |
15A 250 VAGO |
26 |
62 |
| |
4A120 VDC |
|
|
| Gold plated contracts |
1A 125/250VAC |
31 |
70 |
| Hermetically sealed |
5A 250VAC |
32 |
68 |
| |
5A 30VDC |
|
|
| Hermetically sealed |
5A 125/250VAC |
22 |
67 |
| narrow deadband |
1A 125/250VAC |
42 |
71 |
| Hermetically sealed |
|
|
|
| Gold plated contracts |
15A 250VAC |
50 |
- |
| Variable dead band |
|
|
|
|
|
| PRESSURE / VACUUM SWITCHES |
|
|
B Series switches are designed to handle pressure from vacuum to 210 kg/cm². These are designed for high proof pressures. B series switches use a diaphragm sealed piston actuator. As the pressure on the calibrated piston increases, the adjusted spring force is over-come and the snap action switch is actuated. The piston is sealed from the process by a diaphragm. Choice of diaphragm materials offer compatibility with virtually any medium. A welded stainless steel actuator is, also available as an option from 0.05-1 kg/cm² to 3.5-70 kg/cm² ranges. |
| C |
ACTUATOR SEAL (1) |
| B4 |
Pressure switch, weather proof |
| B7 |
Pressure switch, explosion proof |
| D4 |
Differential pressure switch, weather proof |
| D7 |
Differential pressure switch, explosion proof |
| T4 |
Temperature switch, weather proof. |
| T7 |
Temperature switch, explosion proof. |
| |
|
| 1 |
Process connection size is ¼ NPT (F) for all ranges |
| 2 |
Max. temperature can be increased to 150° using option |
| |
XTV. |
| 3 |
Order option XHXfor 7 kg/cm² max. pressure in mm |
| |
H2O ranges. |
| * |
Max. Pressure for SS diaphragmis 165 kg/cm² |
|
| O. ADJUSTABLE RANGE |
PROOF PRESS |
| VACUUM |
|
| H 760-0 mm HQ |
16 kQ/cm² |
| COMPOUND |
|
| (-) 375-(+) 375 mm H2O |
1.4 kg/cm² (3) |
| (-) 760-(+) 760 mm H2O |
1.4 kg/cm² (3) |
| (-) 1-(+) 1 kg/cm² |
16 kg/cm² |
| (-) 1-(+) 2 kg/cm² |
16 kg/cm² |
| (-) 1-(+) 4 kg/cm² |
16 kg/cm² |
| |
|
| WATER COLUMN |
|
| 12.5-250 mm H2O |
1.4 kg/cm² (3) |
| 37.5- 750 mm H2O |
1.4 kg/cm² (3) |
| 75-1500 mm H2O |
1.4 kg/cm² (3) |
| 125-2500 mm H2O |
1.4 kg/cm² (3) |
| 187.5-3750 mm H2O |
1.4 kg/cm² (3) |
| |
|
| PRESSURE |
|
| 0.05-1.0 kg/cm² |
33 kg/cm² |
| 0.1-2.0 kg/cm² |
33 kg/cm² |
| 0.2-4.0 kg/cm² |
33 kg/cm² |
| 0.35- 7.0 kg/cm² |
65 kg/cm² |
| 0.7 -14.0 kg/cm² |
65 kg/cm² |
| 1.4-28.0 kg/cm² |
170 kg/cm² |
| 2.1-42.0 kg/cm² |
170 kg/cm² |
| 3.5- 70.0 kg/cm² |
800 kg/cm² |
| 10.5-210.0 kg/cm² |
800 kg/cm² |
| |
|
|
|
|
