|
|
PRODUCT PREVIEW |
| ACRYLIC BODY ROTAMETER |
| |
| FEATURES: |
| Acrylic Rotameters are precision machined from clear acrylic block and fitted with needle valves stream lined in appearance. They are designed to give maximum Accuracy visibility & Ruggedness. |
| FLOATS: |
| Stainless steel, Teflon, PVC or as per requirement. In bigger models guide rods are provided for better stability. |
| METERING VALVE: |
| For Accurate flow control precision machined needle type valves are |
| ACCURACY: |
| Standard Accuracy of 1.5 to 1% at full Scale. Better accuracy on specific requirement. |
| FITTINGS: |
| Top / Bottom or Rear as per requirement in S.S. screwed, Nozzle, with Suitable "0" Rings to avoid leakage. |
| CALIBRATION: |
| Carried out at works individualy using air and water at standard condition. Reliable impirical conversion, are used to calibrate for other fluids. |
| INSTALLATION: |
| Rotameter are ideal for direct Panel mounting because of their neat modular apperance, online is also possible. |
| TECHNICAL DATA |
TECHNICAL SPECIFICATION |
| METERING BODY |
: ACRYLIC PLASTIC |
| WETTED PART |
: SS / BRASSI PVC / TEFLON |
| FLOAT |
: SS / TEFLON / PVC / P.P.1/4" NPT / BSP / SCREWED REAR WITH VALVE. |
| PIPE CONNECTIONS |
: AND FANGED TOP BOTTOM / REAR |
| "0" RING |
: STD : NEOPRENE / TEFLON VITON SILICON |
| SCALE |
: ENGRAVED ON THE BODY |
| PRESS RATION |
: TO 100 PSIG STD |
| RATING |
: 0 PT HIGHER RATING ON SPECIAL APPLICATION |
| TEMP. |
: UPTO 70° C |
| ACCURACY |
: + .5 TO + 1% AT F.S. |
|
 |
 |
|
|
PRODUCT PREVIEW
 |
| GLASS TUBE ROTAMETER |
| GLASS TUBE ROTAMETER : |
| Glass Tube Rotameter are Precision flow measuring instruments designed on the "Variable Area" Rotameter basis using "TAPERED" Tubes. These instruments Instruments are suitable for service with all available fluid including Acids, Alkalies Corrossive gas and organic Solvents for Temperature upto 150°C with suitable selection of material. |
| METERING TUBES : |
| Extra Thick chemically Resistant annealed and stress Relieved TAPERED glass. |
| FLOATS : |
| Suitable for all corrosive or non corrosive liquids / gases, S.S. Teflon, PVC, etc. |
| FITTINGS : |
| End fittings are either screwed or flanged or for hose connection. |
| CALIBRATION: |
| Calibration is carried out INDIVIDUALY at works using Air and Water at standard condition, with Reliable empirical conversion for other Fluids / Gases. |
| " SPARES ARE READILY AVAILABLE INCLUDING GLASS TUBES" |
| TECHNICAL DATA |
TECHNICAL SPECIFICATION |
| |
|
| METERING TUBE |
: BOROSILICATED TAPERED GLASS |
| FLOAT |
: STD : S.S 304, S.S.316 / TEFLON / PVC ETC |
| PACKING / GASKET |
: STD : NEOPRENE / TEFLON / SILICON / VITON |
| END FITTING |
: STD : ALM. BODY WITH MS. COVER WITH TRANSPARENT ACRYLIC CLEAR / TOUGHNED GLASS. |
| SHIELDING |
: GLASS |
| SCALE |
: WHITE ACRYLIC / ALUMINIUM COATED |
| COLOUR |
: BLUE / HAMERTONE GREY |
| PRESS: RATING |
: UPTO 150 PSIG |
| TEMP. |
: UPTO 150 0C |
| ACCURACY |
: + .5 TO + 1% AT F.S. |
|
|
|
|
|
| DIGITAL FLOW INDICATOR WITH TOTALIZER |
| These are the flow Indicator can be installed on the line Electronic Indication of the Flow in Displayed on a Digital Indicator Device. This Indicating Display can be installed at any continued Position and can be centrally monotored magnetic Indication is also possible with Magnate type Flow Indicator. |
|
 |
|
|
|
|
 |
| BY PASS ROTAMETER |
| TECHNICAL INFORMATION |
| By pass type rotameter are used for linear measurement of fluid flow in conjunction with orifice plates. This is an in expensive method of measuring large flows beyond 20M³ / HR and Line Size 2" and above. Model Rotameter is used to measure flow regardless of main line pipe size. The unit consists of a complete assembly that is to be inserted in the main line and rotameter with calibrated orifice plate which can be assembled to your by pass system. |
| TECHNICAL DATA |
TECHNICAL SPECIFICATION |
| TYPE |
BY PASS ROTAMETER |
| MAIN LINE |
M.S FLANGED / S.S / PVC (PP) |
| ROTAMETER |
ACRYLIC / GLASS TUBE / METALIC |
| |
ENGRAVED ON BODY / WHITE ACRYLIC / |
| SCALE |
ALU. COATED |
| COLOUR |
BLUE / HAMERTONE GREY |
| END FITTING |
STD . M.S / S.S / PVC (PP) |
| BY PASS LINE |
STD G1 "1/2" S.S / PVC (PP) |
| ISOLATING VALVES |
1/2" G.I. / 1/2 " S.S.316 |
| ORIFICE PLATE |
S.S.304 / PVC / S.S.316 |
| ACCURACY |
+ 2.5% AT F.S |
|
|
|
